MENU USCutter.com

Teflon Sheet

33 Item(s)
Items per page:
Sort by:
View:

Non-Stick Sheet for Heat Presses

Heat Press Non-Stick Sheet (ea.) Prices displayed above reflect a 'per sheet' price. In rare cases a larger sheet may be substituted for a smaller sheet due to inventory limitations. Non Stick sheets are great for both fabric and heat press protection for any type of heat transfer. The Non Stick…

(
43
)

PTFE Non-Stick Sheet for Heat Transfer Application

PTFE Non-Stick Sheet (ea.) for Heat Transfer Application Prices displayed above reflect a 'per sheet' price. These non-stick cover sheets are top quality, 5 mil, Triple-Coated advanced fluoropolymer (PTFE) fabric that outperforms other non-stick cover sheets. This sheet is a necessity when using…

Related Products Teflon | Heat Press | Cover Sheet
(
8
)

SISER EasyPatterns Heat Transfer Vinyl with Pre-Printed Designs 12" By The Foot (Series 2)

…process. Just make sure no HTV overlaps another carrier. Otherwise the heat transfer vinyl will adhere to the other carrier and not the garment. Cover everything with a heat transfer cover sheet, press for 10-15 seconds, and peel the carrier hot Please Note: Actual width of 15" roll is 14.75".-->

Related Products Siser | Htv | Heat Transfer Vinyl
(
2
)

FOREVER Finishing Cover Sheet (10 Pack) 11" x 17", Gloss or Matte Finish

FOREVER Anti-Stick Finishing Cover Sheet (10 Pack) 11" x 17", Gloss or Matte Finish Use these Antistick Finishing sheets as instructed in the document accompanying your Forever heat transfer paper: do not substitute a Non-Stick sheet. These sheets protect your transfer and heat press as well as…

(
5
)

PTFE Heat Transfer Application Pillow, Various Sizes Available

…reverse the sheet – both sides are PTFE coated (exception: Salamander Skin dual surface silicone/PTFE liners) * Never scrape or use use hard-edged implement on your PTFE fabric * Never use abrasive cleaning materials * Discard when non-stick surface begins to show wear or sheet edges begin to…

Related Products Pillow | Teflon | Teflon Pillow
(
17
)

Hotronix Hover Press - 16" x 20"

…the press uses a surface cure. The machine closes, but stops 1" above the garment. No ink is lost from contact with the heater or transfer cover sheet. The second setting incorporates pressure that drives the graphic into the item. This gives the item a great feel and extends the wash ability. In…

FOREVER Finishing Cover Sheet (10 Pack) 8.5" x 11", Gloss or Matte Finish

FOREVER Anti-Stick Finishing Cover Sheet (10 Pack) 8.5" x 11", Gloss or Matte Finish Use these Antistick Finishing sheets as instructed in the document accompanying your Forever heat transfer paper: do not substitute a Non-Stick sheet. These sheets protect your transfer and heat press as well as…

(
9
)

SISER EasyWeed Glow In The Dark 20" x 5, 10, 25, 50 Yards

…paper or non-stick cover sheet * Place on flat, hard surface (ironing board not recommended) * Press iron with medium/firm pressure (do not slide iron) * Press each section of design for 10-15 seconds * If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds…

(
3
)

9" x 9" Hobby Heat Press for Iron-On Graphics

…canvas shoes, blankets, and more. Try it on wood! Technical Specs: * Voltage: 110 * 9" x 9" Heating Platen * Warranty: 1 year Box Includes: * 1x 9" x 9" Roving Hobby Heat Press (color may vary) * 1x Insulated Base * 1x High-Temperature Silicone Mat * 1x 12"x12" Non-Stick Sheet * 1x User Manual

Related Products Heat Press | Tshirts | Iron On Vinyl

Siser EasyReflective Heat Transfer Vinyl, 20" x 1ft - 50yd, Silver

…Kraft paper or non-stick cover sheet * Place on flat, hard surface (ironing board not recommended) * Press iron with medium/firm pressure (do not slide iron) * Press each section of design for 10-15 seconds * If areas of design lift after application, replace cover sheet and re-press for 10 seconds…

(
10
)

Chemica Sports 3D Fashion Heat Transfer Vinyl - 15" - By the Foot

…adjust as needed. Weed excess material. Heat press the transfer on the garment with its polyester carrier protected by a silicone paper or Non-Stick sheet. Press with medium pressure at 300-320° F (150-160°C) for 15 - 20 seconds. Peel cool. Note: 3D textures appears more pronounced after backing is…

(
6
)

SISER BlackBoard HTV 12" or 15" By The Foot, Yard, 5, 10, 25, 50 Yards

…Kraft paper or non-stick cover sheet * Place on flat, hard surface (ironing board not recommended) * Press iron with medium/firm pressure (do not slide iron) * Press each section of design for 10-15 seconds * If areas of design lift after application, replace cover sheet and re-press for 10 seconds…

Related Products Iron On Vinyl | Pillow | Siser
123 Next
Reviews for USCutter
Powered by Viewpoints