Blades
Condition
Warranty
Print Compatibility
SC / SC2 Series Vinyl Cutter Compatible Blades - 45, 60 Degrees
…cutting orientation of the 45 degree blade accurately distributes the cutting task over a larger blade area, and thus last longer (and is cheaper). So use a 45 degree blade always, unless a 60 degree blade is needed for thick or more custom types of cutting, if 45 degrees blades are not available.
LaserPoint II/ 3 Vinyl Cutter Blades - 45 and 60 Degrees
…cutting orientation of the 45 degree blade accurately distributes the cutting task over a larger blade area, and thus last longer (and is cheaper). So use a 45 degree blade always, unless a 60 degree blade is needed for thick or more custom types of cutting, if 45 degrees blades are not available.
3 Pack of Roland Compatible Cemented Carbide Blades - 45 Degrees
…cutting orientation of the 45 degree blade accurately distributes the cutting task over a larger blade area, and thus last longer (and is cheaper). So use a 45 degree blade always, unless a 60 degree blade is needed for thick or more custom types of cutting, if 45 degrees blades are not available.
TITAN Series Vinyl Cutter Compatible Blades - 30, 45 and 60 Degrees
…cutting orientation of the 45 degree blade accurately distributes the cutting task over a larger blade area, and thus last longer (and is cheaper). So use a 45 degree blade always, unless a 60 degree blade is needed for thick or more custom types of cutting, if 45 degrees blades are not available.
USCutter MH Series Vinyl Cutter w/ VinylMaster Cut Software
…Serial, and USB * 3 blades included * Pen adapter (use to plot instead of cut) * Cover (Note: 14" does not come with cover) * 1 Year Warranty * FREE Lifetime phone support * FREE Lifetime support site Standard blade holder gives you access to the most economical blades available. Three fully…
Blade Holder for USCutter MH Series Vinyl Cutter
Blade Holder for USCutter MH Series Vinyl Cutter Blade Holder for USCutter MH models: MH365 (14"), MH721 (28"), MH871 (34"), MH1101 (40"), MH1351 (50").
Graphtec Compatible 0.9mm 45 degree replacement blades with Springs 3/pk
Graphtec Compatible 0.9mm 45 degree replacement blades 3/pk These Graphtec compatible blades come with a spring for each blade. PLEASE NOTE: These blades are for CE5000 series and larger cutters only. They will not work in the Graphtec Craft Robo.
Graphtec 1.5mm Supersteel 45° Blades (2/pack) p/n CB15U-2
…45 Degree Blades (2/pack) 1.5mm 45°, Supersteel Blade (2/pack) / for PHP32/33/35-CB15N-HS Blade holders with built in springs. For cutting media which was too thick for the CB09UA blade. Suitable for cutting media from .25mm to .5mm thick. * These blades can be used with blade holders which…
Genuine Roland 45 degree blades for Cast & Calendered Vinyl, pkg/3
Genuine Roland 45 degree blades for Cast & Calendered Vinyl Standard replacement blade for use with Roland CAMM-1 vinyl cutters for cutting cast and calendered vinyl. 45 degree, 0.25 offset. Pkg. of 3. roland part #: USA-C145-3
HP Vinyl Cutter Standard Blade Kit 1UX44A
HP Vinyl Cutter Standard Blade Kit HP Latex Standard Blades used to cut most common Print and Cut medias such as Self Adhesive Vinyl. accessory consist of 5 blades and cut strip.
Graphtec 0.9mm 45° or 60° Blades CB09UB (2 & 5 packs)
…45° Blades: CB09UB-2 5 Pack 45° Blades: CB09UB-5 5 Pack 60° Blades: CB09UB-K60-5 CB09UB blades are compatible with Blue Tip PHP33-CB09N-HS or Premium PHP35-CB09-HS Graphtec Blade holders. Note: These blades are compatible with older Blue Top blade holders but the springs from previous blades must…
Yellotools YelloBlade Mini Replacement Blades for Removal of Small Vinyl Details
Yellotools YelloBlade Mini Replacement Blades for Removal of Small Vinyl Details Yellotools puts an ingenious spin on the everyday sign tool! Here are replacement blades for the YelloBlade Mini vinyl remover/de-applicator for more detailed work. The Mini is made from the same high-performance…
Copyright © 2019 USCutter, Inc. All Rights Reserved.
